Home > MK2 Golf/jetta (85-92) >

MK2 VR6 Swap Mounts
MK2 VR6 Swap Mounts


 
Alternative Views:


Our Price: $349.00

Quantity in Stock:4
Availability:: Usually Ships in 24 to 48 Hours
Product Code: EW4000


Add Billet crank pulley?:


Powder coat?:


Rear Mount type :


Swap version:


Qty:  
Description
 
MK2 AAA VR6 engine conversions kits by Eurowise are here!!! We created engine mounts that bolt straight to your OEM MK2 Subframe (K-frame) and OEM MK2 front cross member.

In the past, finding a donor car, pulling your engine, your k frame and all your suspension entirely apart just to fit this kit was needed. Now you just remove the engine, bolt these brackets onto your VR6 motor and install back into your MK2!

This kit includes the front engine/transmission mount and the passenger rear engine mount. When swapping a VR6 engine it requires the 02a/02j VR6 transmission. Be sure you obtain the OEM transmission mount as well, as its needed for the swap.

Our kit sits like the standard mk2 vr6 swap using oem subframe and such. it does sit against the frame rail so you will be required to clearance it a little with a hammer or buy our smaller crank pulley to clear it without modification. the mount kit is economical version so it works with OEM bushings and oem transmission bracket. This kit includes front mount and rear engine mount. if you want poly we can supply them for additional cost. it does make the engine sit level in the engine bay

NOTE *** THIS WILL NOT WORK ON PLUS SUSPENSION SETUP
must use 4 cylinder spindles and control arms.
IF YOU ARE RUNNING POWER STEERING IT WILL REQUIRE MODIFICATION TO FRONT CROSS MEMBER

Fits all 12v VR6 motors


Parts Include:

LEVEL 1

- Front Mount
- Rear Engine Mount
- Hardware

LEVEL 2
- Front Mount
- Rear Engine Mount
- Hardware
- OE Mount Bushings

LEVEL 3

- Front Mount
- Rear Engine Mount
- Hardware
- OE 02a / 02j Axles







If your vehicle previously had a VR6 subframe or has any VR6 conversion parts this kit will not work or may not fit. This kit only works with MK2 mounts and mounting frame.

When selecting mounts, choose which version subframe you have below.

Option 1
( Single bolt in engine mount ) Passenger rear mount




Option 2
( double bolt in engine mount ) Passenger rear mount



Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 December 30, 2019
Reviewer: Marcel Figueroa from Repentigny, QC Canada  
Had issues with powdercoat chipped in shipping, had a little discount for it! Good service

Was this review helpful to you?