Home > Eurowise Products > Volkswagen > MK1 Rabbit / Caddy / Jetta / Cabriolet >

MK1/MK2/MK3 Wilwood Rear Disc Brake Conversion Dual Caliper
MK1/MK2/MK3 Wilwood Rear Disc Brake Conversion Dual Caliper

Alternative Views:

Our Price: $799.00

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 1 to 2 Weeks
Product Code: EW5100

Add rear brake discs with bearings:

Add rear stub axle:

Chassis ( select one ):

This brake kit has been developed for the MK1/MK2/MK3 226mm rear disc set-up, can also be used to upgrade rear drums. More information further down, for that application.

The kit was developed mostly for a very well balanced brake bias. With the weight transfer during braking on our cars, if the piston size is too big on the rear calipers, the rear will lock up before the front; not something desirable. The piston size in this kit, is the same as the Scirocco 16V rear calipers and smaller than the MK4 alloy calipers, that have too much of a piston area / clamping force, to be properly balanced with our earlier W/C models.

Parts Included:

Qty 2 - Grey Anodized Powder Coated (special / custom made) 2 piston calipers. Gloss Black / Red at an additional cost.
Qty 2 - Red or black Mechanical parking brake calipers, with laser cut pad spacers, for a perfect fit.
Qty Pads for all 4 calipers
Qty 2 - Stainless braided lines with 90 deg. JIC / proper fittings. These thread into the fitting UPSTREAM the axle beam, bypassing the hard line on the axle beam.
Qty 2 - 6061-T6 aircraft grade powder coated mounting brackets.
Qty 2 - Cable sleeve for factory E-brake cable fit in caliper stop
Qty 2 - barrel cable stops
All necessary hardware / shims / washers.

What you need to have prior, to install this kit:
Disc stub axles, Disc brake cables, OEM 226mm Discs (P/N 6N0 615 601)

To convert from drums, contact us, we can supply a complete solution, with stub axles, bearings and even e-brake cables.

Instructions are on web based link in PDF format, with plenty of pictures.

These kits clear 13 inch wheels:
Rear splash guard needs to be omitted, as the bracket will take its place

This kit will not work on Narrowed beams. Will only work with stock length rear beam.
Make sure to select Caddy when buying for a caddy. Brake lines are different
ebrake caliper only comes in black finish


100 Series 1969-1977

4000 1980-1987

Coupe 1981-1987

Fox 1973-1979


Cabrio 1995-2002

Cabriolet 1985-1993

Corrado 1990-1995

Dasher 1974-1981

Fox 1987-1993

Golf 1985-1998

Golf 1999 Thru 9/98; VIN 1H.XM240 854

Jetta 1980-1998

Jetta 1999 Thru 9/98; VIN 1H.XM240 854

Passat 1990

Passat 1991-1993 FWD

Passat 1994-1997

Quantum 1982-1985

Quantum 1986-1988 FWD

Rabbit 1975-1984

Rabbit Convertible 1980-1984

Rabbit Pickup 1980-1983

Scirocco 1975-1988 (8v +16v)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Great product February 10, 2021
Reviewer: taggart braggart from Meridian, ID United States  
Lots of bits and bops, but everything is their to get you going, I do wish they had better instructions. And I would give them 4 stars because they messed up my order, but Mike is a great shop owner and I have confidence it was just a accident.

Was this review helpful to you?