GEN 1 - 3" LIFT KIT (AIR SUSPENSION) - CAYENNE/TOUAREG/Q7

Eurowise 3” Lift Kit for First Gen Porsche Cayenne, VW Touareg, and Audi Q7s equipped with Air Suspension

Built for extreme off-road performance, the Eurowise 3" Lift Kit is a rugged, bolt-on solution engineered to handle everything from rock crawling to desert trails. To eliminate common OEM failure points, we reinforce the factory strut brackets with larger, wider, and thicker components—ensuring long-term durability under demanding conditions.

Our cast, drop-forged strut extensions are designed to retain OEM sway bar end links. In some cases, if contact occurs between the extensions and factory links, we recommend upgrading to our spherical sway bar links. These are available separately and can be installed at the same time for a seamless upgrade.

Note: Strut extensions are not compatible with Arnott-brand replacement air struts.

A 3” lift on most vehicles will introduce more positive camber than the factory upper control arms can compensate for. For proper alignment and geometry, we recommend adding our Tubular Upper Control Arms.

Professional installation is highly recommended. Strut bolts must be torqued with the suspension loaded. This is a direct bolt-on kit requiring removal of the front and rear strut assemblies, along with lowering the rear cradle and front subframe.

Note: This lift kit will max out the functional range of the suspension level sensors. The highest setting on the air suspension controller will no longer increase ride height beyond the lift provided by this kit.

On a service lift or full droop condition, when the wheels are off the ground, the spindle will make contact with the strut body. This contact will only occur during full droop, not during normal ride height or while driving.

FITMENT:

2002-2010 VW Touareg (with OEM air suspension)

2002-2010 Porsche Cayenne (with OEM air suspension)

2006-2015 Audi Q7 (with OEM air suspension)

PRODUCT INCLUDES:

(4) Front Strut Brackets w/ Hardware

(6) Front Upper Shock Mount Spacers w/ Hardware

(4) Rear Upper Shock Mount Spacers w/ Hardware

(4) Level Sensor Links w/ Hardware

(2) Front Level Sensor Mounts

(1) 1.5" Subframe Drop Kit w/ Hardware

Disclaimer:
For both on-road and off-road use, we strongly recommend keeping the vehicle in “Auto” mode (the middle height setting). Operating in “Offroad” or “High” mode with a lift kit installed can lead to long-term damage, including excessive wear on axle joints due to extreme angles, as well as potential damage to the strut body under full droop conditions.

Driving in any mode other than the middle setting is not recommended.

Due to the nature of the suspension geometry, additional lift may cause the air strut’s plastic bellows to make contact with the spindle at full droop. This is expected and considered normal under those conditions.

Install at your own discretion. Professional installation is strongly recommended. Eurowise is not responsible for any damage resulting from improper installation or misuse.

HELPFUL LINKS:

Tire Fitment Guide

Installation Guide

Offroad Build Gallery