GEN 2 - 2" LIFT KIT (STEEL SPRING) - CAYENNE/TOUAREG

Eurowise 2” Lift Kit for Second Gen Porsche Cayenne and VW Touareg with Steel Spring Suspension

CNC-machined from solid 6061 aluminum, the Eurowise 2” Lift Kit is built for lasting durability—it will not wear out or fail over time. This direct bolt-on kit installs over the top of the OEM front struts and between the upper strut mount and spring in the rear. Installation requires removal of both front and rear strut assemblies; however, front struts do not require disassembly.

What sets our kit apart? Unlike other lift kits, we include a shock shaft extension to account for the added spacer height. This helps maintain factory spring rate, shock travel, and ride quality, delivering better performance both on-road and off.

Strut extensions are available for vehicles with or without electronic dampening. For vehicles with electronic dampening, the connector must be depinned, the harness routed through the center of the extension, and then reassembled.

Note: The physical thickness of the billet spacers does not directly equal the lift height. Spacer thickness is geometry-specific, so it's normal if the spacer does not measure exactly 2 inches.

FITMENT:  

2011-2018 Volkswagen Touareg (with steel coil spring suspension)

2011-2018 Porsche Cayenne (with steel coil spring suspension)

PRODUCT INCLUDES: 

(2) Front Spacers w/ Hardware

(2) Rear Spacers  

(2) Rear Shock Extensions

(1) Loctite for Rear Shock Extension

Additional Options: Transmission & Driveshaft Support Drop Kit

After over four years of research and testing across hundreds of vehicles, we’ve identified a common issue: front and rear driveshaft flex boots can tear or separate due to the slight angle changes introduced by subframe drops. This is especially true for vehicles with worn or aging rubber boots. While not always required, a transmission spacer drop can help maintain proper driveline angles and significantly extend the life of these components.

This kit includes a transmission drop spacer, center driveshaft support drop, and a redesigned center support bracket that replaces the OEM unit to eliminate any potential contact or rubbing issues.

Be sure to select the correct transmission drop bracket thickness to match your subframe drop.

Note: For setups using a ½-inch subframe drop, center support bearing drop spacers are not included.

Product Link for More Info

Install at your own discretion. Professional installation is strongly recommended. Eurowise is not responsible for any damage resulting from improper installation or misuse.

HELPFUL LINKS:

Tire Fitment Guide

Installation Guide

Offroad Build Gallery