GEN 1 & 2 - TRANSMISSION DROP SPACER KIT - CAYENNE/TOUAREG (2003-2017)

Eurowise transmission drop spacers are designed to realign your driveshaft when lowering the subframe. We created these spacers specifically for the Gen 1 and Gen 2 Porsche Cayenne, Volkswagen Touareg, and Audi Q7 platforms after observing improved longevity of the input/output shaft seals on the driveshaft compared to vehicles without them. In some cases, they have also helped reduce drivetrain vibration on higher-mileage vehicles with worn driveshaft joints.

After 4+ years of research on hundreds of vehicles. We've seen front and rear driveshaft flex dust boots tear or separate from the subframe drop causing slight angle change from the drop. In some cases if your original boots were worn out it could be unavoidable. While the transmission spacer drop is not 100% required. Its advantageous to replace to keep driveline angles straight and extent the rubber boot life. This kit drops the transmission and center driveshaft support. Also included is a center support bracket to replace the original one from rubbing.

Select the thickness of the transmission drop bracket according to your subframe drop size. If you have a 1/2 inch subframe drop, you will not receive center support bearing drop spacers 

Product Includes: 

Qty 2 Transmission drop spacers

Qty 1 Tunnel brace

Qty 1 Driveshaft support drop spacers

Qty 1 Installation hardware

*only 1 pair per order*

.5” Spacer Kit 

- For vehicles with .5" Subframe Drop 

1” Spacer Kit

- For vehicles with 1” Subframe Drop 

1.5” Spacer Kit 

• For vehicles with 1.5” Subframe Drop