GEN 2 - 3" LIFT KIT (STEEL SPRING) - CAYENNE/TOUAREG

Eurowise 3” Lift Kit for Second Gen Porsche Cayenne and VW Touareg with Steel Spring Suspension

CNC-machined from solid 6061 aluminum, the Eurowise 3” Lift Kit is built for maximum durability—it will not wear out or fail over time. This direct bolt-on kit installs over the OEM front struts and between the upper strut mount and rear spring. Installation requires removal of the front and rear strut assemblies, as well as dropping both the front and rear subframes. Front struts do not require disassembly.

What sets our kit apart from the rest? We include a shock shaft extension that compensates for the spacer between the spring and strut mount. This maintains OEM spring rate, shock travel, and ride quality, ensuring better suspension performance both on and off the trail.

Strut extensions are available for vehicles with or without electronic dampening. For vehicles equipped with electronic dampening, the connector must be depinned, the harness routed through the center of the extension, and then reassembled.

Note: The physical thickness of the billet spacers does not directly equal the lift height. Spacer design is based on suspension geometry, so it is normal if the spacer does not measure exactly 3 inches.

FITMENT: 

2011-2018 Volkswagen Touareg (with steel coil spring suspension)

2011-2018 Porsche Cayenne (with steel coil spring suspension)

PRODUCT INCLUDES:

(2) Front Spacers w/ Hardware

(2) Rear Spacers 

(2) Rear Shock Extensions

(1) Loctite for Rear Shock Extension

(1) 1" Subframe Drop Kit

Additional Options: Transmission & Center Driveshaft Support Drop Kit

Through over four years of testing across hundreds of vehicles, we've identified a common issue—front and rear driveshaft flex boots can tear or separate when subframe drops alter driveline angles. This is especially common on vehicles with worn or aging rubber boots.

While not always required, adding a transmission spacer drop can help maintain proper driveline geometry and significantly increase the lifespan of these components. This kit includes a transmission drop spacer, center driveshaft support drop, and a redesigned center support bracket to replace the factory unit, eliminating the risk of rubbing or premature wear.

Be sure to select the transmission drop bracket thickness that corresponds to your subframe drop setup.
Note: If you're using a ½-inch subframe drop, center support bearing drop spacers will not be included.

Product Link for More Info 

Install at your own discretion. Professional installation is strongly recommended. Eurowise is not responsible for any damage resulting from improper installation or misuse.

HELPFUL LINKS:

Tire Fitment Guide

Installation Guide

Offroad Build Gallery