VR6 CONVERSION AXLES - MK1

MK1 VR6 axles from our VR6 conversion kit.

Works only with Eurowise built mounts. These will work with 02a/02j transmissions (02J with 100mm output shaft hubs ONLY). If you have a late model 02j from a MK4+ chassis you more than likely have 108mm hubs. You need to remove and install 100mm joints.

Some additional items may needed to taken into account when swapping.

• When running 02j transmission and running our manual cable conversion you will have interference issues with reverse switch, when using 02j shifter tower or transmission you must cut off the mounting flange for the reverse switch.
• Late model 02j transmission (1.8t and VR6) have 108mm axle flanges. These will not work with our axles. However the solution to change axle flanges are very easy- Part Numbers needed are: qty 2 02A-409-355D qty 2 02j-409-359.

DISCLAIMER - FOR OFF-ROAD USE ONLY

Eurowise parts, are sold for off-road use only. All performance modifications and installations are at the customers own risk.Eurowise Performance Fabrication Inc. or www.eurowise.com hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products. Items sold for off-road use only are illegal in many states and provinces and are intended for racing vehicles which may never be used on a public road.

By purchasing any aftermarket performance product, the customer takes full responsibility for any use, and/or misuse of the product and agrees that Eurowise Performance or www.shop.eurowise.com holds no responsibility for any consequences, legal, or other, of such use and/or misuse.